Holographic Custom Vinyl Stickers

HOW TO ORDER

Start by uploading up to four image files in formats like PNG, SVG, PSD, or others. For custom-cut shapes, we recommend using images with transparent backgrounds. Next, choose your preferred finish, select the quantity, and place your order—simple!

No design software? No transparent file?
No worries! If you want a custom shape but can't provide a transparent image, just mention it in the upload notes, and we’ll help you out.

FILE PREPARATION GUIDE

Before you upload your designs, here’s how to get them ready for the best results:

WHITE BORDER

By default, we add a 2–4mm white outline around your design to guide the cutting. If you're comfortable with design software, you can include this outline yourself—just make sure it matches the intended final size.

Prefer a different border colour? Just send us the HEX code (e.g., #FFBC00 for our signature yellow), and we’ll make the change.

EDGE-TO-EDGE CUT (NO BORDER)

Want stickers without a white edge? That’s possible if:

• We can cut inside the design edge, or

• The outer edge of your artwork is a single, solid colour.

You can make this easier by:

• Adding a 2–4mm bleed around the design and asking us to cut inside the bleed.

• Providing the HEX code of the border colour so we can extend the bleed as needed.

IMAGE QUALITY

To get sharp prints and clean cuts, ensure your files are at least 1500 pixels on the longest side, and saved at 300 DPI.
Low-resolution or pixelated files might not meet our production standards and could be rejected.

COLOUR SETTINGS

We print with a 4-ink CMYK dye-based Epson inkjet for vibrant, accurate colour. For best results, design your artwork using the CMYK colour profile. Some RGB tones, especially neon greens or bright cyans, may not reproduce accurately in print.

STICKER SIZE OPTIONS

Choose from our standard sizes, based on the largest side (height or width) of your design:

• 4 inches (10 cm)

• 3 inches (7.6 cm)

• 2 inches (5 cm)

Need a precise size? Select the closest larger option and leave a note with your preferred dimensions (e.g., “Please size to 9cm on the longest side”).

FINISH OPTIONS

We offer two protective laminations:

• Matte Finish (75 micron): Smooth, non-glossy, reduces glare, ideal for minimal or muted designs. Water- and scratch-resistant.

• Gloss Finish (75 micron): Reflective and vibrant, enhances colours and dark tones, gives a "wet-look" finish. Also water- and scratch-resistant.

ORDER QUANTITY

You can include up to four different designs per order and receive a bulk discount based on quantity. We offer the following amounts:

1, 24, 48, 96, 200, 500.

NEED HELP?

Have questions about preparing your artwork, uploading files, or anything else?
E-mail us at: hello@innov8print3d.com